1, Alloy grade and chemical composition
ZK60A | ASTM B 107/B 107M | ||||||||
Elements | Zn | Zr | Others,total | ||||||
Min % | 4.8 | 0.45 | |||||||
Max % | 6.2 | 0.3 |
AZ31B | ASTM B 107/B 107M | ||||||||
Elements | Al | Zn | Mn | Si | Fe | Cu | Ni | Ca | Others,total |
Min % | 2.50 | 0.60 | 0.20 | ||||||
Max % | 3.50 | 1.40 | 1.00 | 0.10 | 0.005 | 0.05 | 0.005 | 0.04 | 0.3 |
AZ61A | ASTM B 107/B 107M | |||||||
Elements | Al | Zn | Mn | Si | Fe | Cu | Ni | Others,total |
Min % | 5.80 | 0.45 | 0.15 | |||||
Max % | 7.20 | 1.50 | 0.50 | 0.10 | 0.005 | 0.05 | 0.005 | 0.3 |
AZ80A | ASTM B 107/B 107M | |||||||
Elements | Al | Zn | Mn | Si | Fe | Cu | Ni | Others,total |
Min % | 7.80 | 0.20 | 0.12 | |||||
Max % | 9.20 | 0.80 | 0.50 | 0.10 | 0.005 | 0.05 | 0.005 | 0.3 |
WE43B | ASTM B 107/B 107M | |||||||
Elements | Y | Nd | Mn | Zr | Fe | Cu | Ni | Others,each |
Min % | 3.7 | 2.0 | 0.4 | |||||
Max % | 4.3 | 2.5 | 0.03 | 1.0 | 0.01 | 0.02 | 0.005 | 0.01 |
M1C | ASTM B 843 | |||||||
Elements | Al | Si | Mn | Fe | Cu | Ni | Others,each | Others,total |
Min % | 0.50 | |||||||
Max % | 0.01 | 0.05 | 1.30 | 0.03 | 0.02 | 0.001 | 0.05 | 0.3 |
M1A | ASTM B 107/B 107M | |||||||
Elements | Ca | Si | Mn | Fe | Cu | Ni | Others,each | Others,total |
Min % | 1.2 | |||||||
Max % | 0.3 | 0.10 | 2.0 | 0.05 | 0.01 | 0.3 |
99.80A | ASTM B 92M | ||||||
Elements | Na | Sn | Mn | Pb | Cu | Ni | Others,each |
Min % | |||||||
Max % | 0.006 | 0.01 | 0.10 | 0.01 | 0.02 | 0.001 | 0.05 |
AZCOM | |||||||||
Elements | Al | Zn | Mn | Si | Fe | Cu | Ni | Ca | Others,total |
Min % | 2.2 | 0.4 | 0.15 | ||||||
Max % | 2.6 | 0.6 | 1.00 | 0.10 | 0.005 | 0.1 | 0.03 | 0.04 | 0.3 |
2, Specifications
Grade |
Specification of current products |
ZK60A | Φ100mm,Φ120mm,Φ260mm,Φ482mm |
AZ31B | Φ100mm,Φ120mm,Φ181mm,Φ201mm,Φ230mm,Φ260mm,Φ482mm |
AZ61A | Φ100mm,Φ260mm,Φ482mm |
AZ80A | Φ100mm,Φ260mm,Φ482mm |
WE43B | Φ120mm,Φ260mm |
99.80A | Φ181mm,Φ201mm,Φ230mm |
M1C | Φ120mm,Φ181mm,Φ201mm,Φ230mm |
M1A | Φ181mm,Φ201mm,Φ230mm |
AZCOM | Φ120mm,Φ181mm,Φ201mm,Φ230mm,Φ260mm,Φ482mm |
6.4 The surface roughness after maching is 6.4.
Diameter of casting ingots |
Allowable tolerance of diameter |
Allowable tolerance of length |
Curvature |
End oblique cutting |
|||
Long ingots |
Short ingots |
Per meter |
Overall length |
||||
Less than | |||||||
<200 | ±3 | ±1 | +10 0 |
The cutting right angle should not exceed 1 degree |
|||
≥200~<300 | ±3 | +0 -1.6 |
5 | 15 | |||
≥300~500 | ±4 | 3 |
Shandong Hongtai Science and Technology CO.,LTD which was founded in 2004 is one of most professional and famous Cathodic Protection manufacturers in China especially in producing magnesium anodes/ aluminium anodes/ zinc anodes and other impress current anodes for many years relying on the advanced producing and testing equipments. Hongtai is still chinese standard drafter in mg anode rod for electric water heaters and international standard revision in magnesium alloy sacrificial anode . Cathodic protection products of Hongtai have passed the certificates of DNV, CCS, BV, SGS, ISO9001, ISO14001, etc. Now we are operating on six continents as Asia, Africa, Europe, North America, South America and Oceania. For more information about us, welcome to visit our Website.
CERTIFICATES:
DNV, CCS, BV, SGS, ISO9001, ISO14001, ETC.
Packaging & Shipping:
SEAWORTHY PACKING, PLASTIC FILM PACKED AND PUT INTO STRAP BUNDLED STRENGTH WOODEN OR PLYWOOD CASES; ALSO AS CLIENTS' REQUIREMENT .
HONGTAI Exhibition:
Product Line: